4″/6″ ETL/DLC 9W/15W led panel lights


Products picture:





Basic information: 


Port:  Zhongshan,China

Production Capacity: 1,000,000 sets per month

Payment Terms: T/T, B/L, Paypal etc.

Application: Indoor

IP rating: IP20

Emitting Color: 2700K-6500K

Input Voltage:120V

Power: 9w/15w(4″/6″)

Approved: ETL/DLC/Energy Star

Leadtime: within 3 days for samples, 15-25 days for bulks





Material Aluminum+PS Input voltage AC120V
Lumen flux 80-90LM/W LED SMD 2835
Size 4inch,6inch Power Factor 0.9
CRI Ra≥80 Beam angle 120°
Lifespan 50,000 hours CCT(K) 2700K-6500K
Warranty 5 years Operating temperature -20~50ºC



Products structure: 






IC Rated–This canless LED recessed light is IC rated, which is permitted to be in contact with insulations in ceilings, meaning the junction box is thermally protected. It only requires as small as 2 inches ceiling spaces, fits various ceilings, and joists.      Recessed can is no longer a limitation for your choice.

High Brightness–The 6-inch slim lights use the new generation of LED chips with higher lumens and lower power. 1200LM consumes 15 Watts, which equals to 110W incandescent lamp, saving you up to 88% in energy costs. Frosted LED lens for anti-glare and scratch-resistant.

Easy Install–The low profile recessed lighting is suitable for retrofit and new decoration: Cut a hole in ceiling with 1:1 hole template; Connect the Jbox to the cable; Use spring clip to fix it on the ceiling. Hassle-free, the installation can be completed in minutes.

Wide Application–Ultra-thin body, 5%-100% smooth dimming, compatible with  most dimmers, suitable damp location, meets kinds of needs in applications such as kitchen, living room, bedroom, bathroom, workplace, common areas, outside soffits and other hard to reach spaces.



Installation guide:   




5CCT switch application:                                                                                                                   



Approved certification:                                                                                                     



Strictly management under ISO9001-2015:


Raw material inspection⇒ Power test after assembly⇒ Aging test⇒ Waterproof Ip65 test⇒ Drop test⇒ Integrating sphere test⇒ IES testing⇒ Surge protection test⇒ Voltage resistance test⇒ Packing



Our factory :                                                                                                                           





Q1. Can I have a sample order for led light?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.


Q2. What about the lead time?
A:Sample needs 3-5 days, mass production time needs 20-30 days according to order quantity.


Q3. Do you have any MOQ limit for led light order?
A: Low MOQ, 1pc for sample checking is available.


Q4. How do you ship and how long ?
A: We usually ship by sea,the shipping time according to where you are. Air cargo,DHL, UPS, FedEx or TNT is also available for sample.It may need 3-5 days.


Q5. How to proceed an order for led light?
A: Firstly, let us know your requirements or application.
Secondly ,We quote according to your requirements or our suggestions.
Thirdly ,customer confirms the samples and places deposit for formal order.


Q6. Is that OK to print my logo on led light products?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.


Q7: Do you offer guarantee for the products?
A: Yes, we offer 2-5 years warranty to our products.


Q8: How to deal with the faulty?
First, Our products are produced in strict quality control system and the defective       rate will be less than 0.2%. Second,we will send new lights with new order for small quantity during warranty.  For defective batch products, we will repair them and resend them to you or we can discuss the solution including re-call according to real situation.