WOSEN LIGHTING TECHNOLOGY LIMITED

WOSEN LIGHTING TECHNOLOGY LIMITED

Home> Blog> Delayed light off, light control chicken called circuit principle

Delayed light off, light control chicken called circuit principle

May 25, 2023

The circuit operation principle of the device is shown in Fig. 4. When the push button switch AN is not depressed, the triode VT is off-biased and turned off. At this time, the c--e-pole resistance of the VT is greater than 50K, so the LSE's 1st and 2nd feet are equivalent to an open circuit, and the LSE's 4th pin outputs a low level. , relay J is released. When the switch AN is turned off, its current is quickly charged to the capacitor C3 through the AN, and the charge is filled in 1 second. At this time, the transistor VT is turned on, and the inter-electrode resistance is reduced, so the LSE is turned on, and the 4-pin output is high. Level, relay J is energized, and lamp H is lit. After releasing the hand, the charge in C3 is discharged to VT through the resistor R, maintaining the conduction of VT. When the charge in C3 is released, VT is cut off, J is automatically released, and H is extinguished. The lighting time of its lamp H depends on the values ​​of R and C3. According to the value shown in Figure *, the delay time is about 1 minute and 30 seconds after the test.

This article refers to the address: http://


Delayed lighter

The circuit operation principle of the device is shown in the following figure. When there is no light shining on the photoresistor RG at night, the internal resistance of RG is very large (far greater than 50K), so the LSE 1 and 2 feet are equivalent to the open circuit, the LSE 4 pin outputs the low level, and the triode VT1 is turned on. Relay J is energized and attracted, its normally closed contact j is disconnected, and the analog chicken circuit IC KD5609 has no power supply and does not work. Once dawn, there is light on the RG, the internal resistance of RG becomes smaller (<50K). At this time, the 4 feet of the LSE output a high level, the transistor VT1 is cut off, the relay J is released, and the contact j is closed, simulating the chicken bark. The circuit is energized to produce a realistic chicken call from the indicator speaker BL.


Light control chicken called circuit

Contact Us

Author:

Ms. Mandy

Phone/WhatsApp:

+8613425434349

Popular Products
You may also like
Related Information
LEAD sincerely released the LED high bay light famous for

On April 22, network activity named "FAST 2015 -! OPEN DAY" was launched by a brand LED high-power outdoor lighting manufacturer- Shenzhen Lead Optoelectronics Technology Co., Ltd.(Chinese name is...

Hublot watch brand ambassadors worldwide "Lightning" Bolt light the light of hope The new Kyoto store interpretation of the fusion of culture

Recently, the world's leading watch brand Hublot and brand ambassador, legendary track and field athlete Usain Bolt hand in hand into Kyoto, the ancient capital of Japan, with passion to ignite...

Cree Introduces XLamp MK-R LED Light Efficiency up to 200lm/W

After two years of breakthrough in the laboratory's light efficiency of 200 lm/W, Cree has finally produced the series of LED chips with 200 lumens per watt at the end of 2012, and officially...

Related Categories

Email to this supplier

Subject:
Email:
Message:

Your message must be betwwen 20-8000 characters

  • Send Inquiry

Copyright © 2024 WOSEN LIGHTING TECHNOLOGY LIMITED All rights reserved. Privacy Policy

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send