WOSEN LIGHTING TECHNOLOGY LIMITED

WOSEN LIGHTING TECHNOLOGY LIMITED

Home> Blog> Explain the heat problem of led solar street lights

Explain the heat problem of led solar street lights

March 12, 2023

There are many led solar street lights on the road. Every night they will work silently to bring us light, but they will also be tired. After a long time of work, they will heat up. At this time, heat is needed. What is the way of cooling the led Solar Street Light?



As for the technology of LED solar street heat dissipation, the heat conduction board is generally a 5mm thick copper plate. In fact, it is a uniform temperature plate, which heats the heat source. It also has a heat sink to dissipate heat, but the weight is too large. The weight is very important in the street lamp system. Generally, the installation of the lamp head is more than six meters high. If the weight is too high, the danger will be relatively increased. Especially in the case of earthquakes and typhoons, it is very likely to cause accidents. Things. Recently, some domestic manufacturers have begun to adopt the world's first needle-shaped heat dissipation technology. The efficiency of heat dissipation of the needle-shaped heat sink is much better than that of the traditional chip radiator, which can make the junction temperature lower than the ordinary radiator by 15 °C or more. And the waterproof performance is better than the ordinary aluminum profile radiator, and also improved in weight and volume.

In the field of solar power generation, led solar street lights have a very important position. The led solar street light system adopts the form of “photovoltaic + energy storage” and is a typical independent solar power generation system. During the day, the sunshine is sufficient for photovoltaic cells to generate electricity, to charge the battery, to discharge the battery at night, and to provide electrical energy to the street lamps. In actual use, if there is no reasonable control on the battery, the charging method is improper, overcharge and overdischarge will affect the battery life. In order to reduce the protection cost, the battery is charged in a most efficient way. Of course, the discharge is reasonable. of.


The above content is provided by WOSEN. WOSEN is a professional manufacturer and supplier of Led Flood Light, Led Street Light, Led Solar Light, etc. For more information, please visit https://www.wosenled.com/ or contact admin@wosenled.com or WhatsApp +86-13425434349




Contact Us

Author:

Ms. Mandy

Phone/WhatsApp:

+8613425434349

Popular Products
You may also like
Related Information
LEAD sincerely released the LED high bay light famous for

On April 22, network activity named "FAST 2015 -! OPEN DAY" was launched by a brand LED high-power outdoor lighting manufacturer- Shenzhen Lead Optoelectronics Technology Co., Ltd.(Chinese name is...

Hublot watch brand ambassadors worldwide "Lightning" Bolt light the light of hope The new Kyoto store interpretation of the fusion of culture

Recently, the world's leading watch brand Hublot and brand ambassador, legendary track and field athlete Usain Bolt hand in hand into Kyoto, the ancient capital of Japan, with passion to ignite...

Cree Introduces XLamp MK-R LED Light Efficiency up to 200lm/W

After two years of breakthrough in the laboratory's light efficiency of 200 lm/W, Cree has finally produced the series of LED chips with 200 lumens per watt at the end of 2012, and officially...

Related Categories

Email to this supplier

Subject:
Email:
Message:

Your message must be betwwen 20-8000 characters

  • Send Inquiry

Copyright © 2024 WOSEN LIGHTING TECHNOLOGY LIMITED All rights reserved. Privacy Policy

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send