Gas station led explosion-proof lamp high power led explosion-proof station light

Applicable places: Widely used in dangerous environments such as oil exploitation, oil refining, chemical industry, military industry, offshore oil platforms, oil tankers and other places. Applicable to Zones 1 and 2 of IIA, IIB, IIC and explosive gas environments. T1-T6 group temperature group. Suitable for places with high protection and humidity.
Gas station led explosion-proof lamp high-power ledled explosion-proof station light


Applicable places: Widely used in dangerous environments such as oil exploitation, oil refining, chemical industry, military industry, offshore oil platforms, oil tankers and other places.

Applicable to Zones 1 and 2 of IIA, IIB, IIC and explosive gas environments. T1-T6 group temperature group. Suitable for places with high protection and humidity.



Structural characteristics:

1. Explosion-proof cold forging radiator: The radiator material is made of 1070 (pure aluminum) aerospace aluminum. The heat transfer guide of the cold extrusion molding process is 226-237W/MK and is more tightly combined after forging. The thermal conductivity is twice that of conventional die-cast aluminum. The cross section is hollow cylindrical, which increases the heat dissipation area. The heat dissipation cavity of the electric appliance and the heat dissipation structure of the light source cavity heat sink are combined.

2, electrical cavity: the design eliminates the heat transfer with the light source cavity, and adopts the hollow type heat dissipation rib structure, which increases the contact area with the air and forms convection, which solves the problem of power supply heat dissipation and increases the service life of the power source and the light source. .

3. Explosion-proof wiring cavity: The patented design of the open cover power-off makes the installation more convenient and safe. The capping terminal is automatically re-energized, and the open-end terminal is automatically separated and disconnected. It will not be installed inside the cable when it is installed like a traditional explosion-proof lamp. The knot, even the twisting, causes short circuit leakage and the like.

4, light source cavity radiator: used to dissipate the heat released by the tempered glass transparent parts; further reduce the overall temperature, increase the service life of components, increase the explosion-proof performance.



Technical Parameters:

Implementation standards: GB3836.1, GB3836.2

Explosion-proof mark: Exd II CT6 Gb

Rated voltage: AC220V 50/60Hz (please specify if there are special requirements)

Protection level: IP66

Luminous flux: ≥120lm/W

Imitation grade: WF1 "WF2

Introducing device: G3/4" inlet specification, suitable for Ф10mm-Ф14mm cable

Terminals:
Installation method: A: ceiling type b: tube crane type c: suction wall type d: method column pole type e: guardrail pole type

LED light source: 70W-120W

Lamp weight: 6.2kg

Dimensions: 260*304mm



Installation method:

 WOSEN is a professional manufacturer and supplier of Led Flood Light, Led Street Light, Led Solar Light, etc. For more information, please visit https://www.wosenled.com/ or contact admin@wosenled.com or WhatsApp +86-13425434349