Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
The light decay of LED products is the weakening of the signal in the transmission of light. At the present stage, the LED products produced by global LED manufacturers have different degrees of light decay. High-power LEDs also have light decay, which has a direct relationship with temperature. It is determined by the chip, phosphor and packaging technology. At present, the light fade of white LEDs on the market may be one of the top issues for civilian lighting. There are two main factors for the light decay of LEDs:
First, the quality of the LED product itself:
1. The LED crystal used is not good, and the brightness decays faster.
2, the production process has defects, LED die heat can not be well derived from the PIN pin, resulting in LED die temperature is too high, the chip attenuation is intensified.
Second, the use of conditions:
1. The LED is driven by a constant current, and some of the LEDs are driven by voltage to cause the LED to be attenuated.
2. The drive current is greater than the rated drive condition.
In fact, there are many reasons for the light decay of LED products. The most critical issue is the hot issue. Although many manufacturers do not pay special attention to heat dissipation in secondary products, the long-term use of these secondary LED products will reduce the degree of light attenuation. LED products should be high. The thermal resistance of the LED die itself, the influence of the silver paste, the heat dissipation effect of the substrate, and the colloid and gold wire are also related to the light decay.
On April 22, network activity named "FAST 2015 -! OPEN DAY" was launched by a brand LED high-power outdoor lighting manufacturer- Shenzhen Lead Optoelectronics Technology Co., Ltd.(Chinese name is...
Recently, the world's leading watch brand Hublot and brand ambassador, legendary track and field athlete Usain Bolt hand in hand into Kyoto, the ancient capital of Japan, with passion to ignite...
This article is reproduced, does not represent the world position of million table.
After two years of breakthrough in the laboratory's light efficiency of 200 lm/W, Cree has finally produced the series of LED chips with 200 lumens per watt at the end of 2012, and officially...
Email to this supplier
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.