Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
The ceiling is a relatively tedious project during the construction of the renovation. Generally, we will see such light steel keel plaster ceilings in some building companies or gyms, cafes and other places. Before this renovation, we must first design a good construction plan, and then proceed with the construction. Here we come to understand how light-gauge steel keel plaster ceiling construction and the ceiling light steel keel gypsum have any characteristics!
First, light steel keel gypsum board ceiling how to construction
1. First of all, we understand from the use of construction materials for light steel keel plasterboard ceilings. Before construction, materials that must be prepared must have light steel skeletons, shot screws, tapping screws, cover panels, adhesives, pendants, and connectors. , hanging plugs, booms. Light steel keel gypsum board ceiling construction operating conditions, the installation of the ceiling of the room wall, the pillars of the masonry, to install the shed height pre-buried good rotten bricks. Determine the position of all air openings in the roof, such as pipes and vents.
2, and then it is to be based on the walls around each floor, and then is to play a good level of control lines, must be clear and accurate requirements of the line of bullets, dividing the keel line. The installation requires dividing the keel sub-line on the top elevation line of the main and sub-keel sub-divisions, and installing the main keel hanger. In order to ensure the stability of the entire skeleton, It is necessary to fix the angle steel with expansion bolts. After elevating the horizontal line of the ceiling elevation line or the keel line, the elevation of the lower end of the boom should be determined. The boom should not be in contact with professional pipelines.
3, the installation of its main keel can use 50 keel or paint keel these two, then the keel in the arch position, it is best to press the room short distance to between 1/200 ~ 1/300. After installing the main keel, install the secondary keel. The main keel's tip should not exceed 300 mm. If the main keel is in conflict with a professional pipe or a large lighting fixture. We must disconnect the main keel and then reinforce it with steel. However, to attach the main keel, we must apply anti-rust paint before the installation process.
Second, light steel keel gypsum board ceiling What are the characteristics
1, but now we have many people in this era will be installed in the living room at home, this light steel keel gypsum board, it is based on gypsum as the main material, add fiber, adhesives, modifiers, mixed Refined and pressed, dried. With fire protection, sound insulation, heat insulation, light weight, high strength, low shrinkage and other characteristics and good stability, no aging, pest control, available nails, saws, planing, sticking and other methods of construction. Widely used in ceilings, partitions, interior walls, and plywood.
2. Under normal circumstances, we can also add lightweight aggregates, make hollows or introduce foams when making gypsum, which can reduce the weight and reduce the thermal conductivity. Incorporation of fibrous materials to increase tensile strength and reduce brittleness, and incorporation of silica-containing mineral powder or organic water repellents to increase their water resistance, sometimes the surface can be coated or aluminum foil to increase aesthetics and moisture resistance. Gypsum board is characterized by light weight, heat insulation, non-combustible, can be sawed and nailed, sound absorption, humidity control, beautiful, but poor moisture resistance, gypsum board is mainly used for interior wall and flat top decorative wall, thermal insulation materials, sound-absorbing materials , on behalf of wood materials.
Xiaobian Summary: The above is how construction on light steel keel gypsum board ceiling light steel keel plaster ceilings and have the entire contents What are the characteristics of the hope that they can help you. If there is something that you do not understand, you can focus on more relevant content. If you want to learn more about building materials, please keep an eye on our website.
On April 22, network activity named "FAST 2015 -! OPEN DAY" was launched by a brand LED high-power outdoor lighting manufacturer- Shenzhen Lead Optoelectronics Technology Co., Ltd.(Chinese name is...
Recently, the world's leading watch brand Hublot and brand ambassador, legendary track and field athlete Usain Bolt hand in hand into Kyoto, the ancient capital of Japan, with passion to ignite...
This article is reproduced, does not represent the world position of million table.
After two years of breakthrough in the laboratory's light efficiency of 200 lm/W, Cree has finally produced the series of LED chips with 200 lumens per watt at the end of 2012, and officially...
Email to this supplier
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.