5 Big Traps Of Led Street Light Procurement

1. Low-end and inferior chips

For LED street lights, the most important thing is the chip, and the quality of the chip determines the performance of the Led Street Light. However, there are some bad manufacturers who take advantage of customers' unprofessionalism in LED street lamps, and use inferior chips in order to reduce the cost of lamps, which leads customers to buy low-quality products at high street light price. Why are some street lights flickering dimly or even not bright one or two months after installation? This is because a bad chip is used that causes problems with the lamp.

2. Unreasonable heat dissipation design and configuration

In LED street lights, the device life of the semiconductor decreases exponentially for every 10 degrees increase in the temperature of the chip. Because the brightness of LED street lights is very high, if the design and setting of heat dissipation are unreasonable, the LED light body will age quickly.

3. The configuration parameters are falsified

The popularity of solar street lamps has brought about a reduction in price and profit. Due to the fierce competition in the market, some unscrupulous merchants will falsify the parameters of the product, and there are problems with the wattage of the light source and the capacity of the battery. Of course, this is the customer's desire for low street lamp prices, and it is also related to the bad practices of some manufacturers.

4. Copper wire posing as gold wire

There are some bad lighting manufacturers to develop copper alloy, silver alloy wire, etc. to replace the expensive gold wire. Although these wires are better than gold wires in some properties, their stability is much poorer. Silver alloys are easily corroded by sulfur/chlorine, etc., and copper alloys are easily oxidized/vulcanized. Many alternatives will be chemically corroded, and over time, the LED light will be disconnected.

5. Controller problem

Unscrupulous manufacturers will use inferior controllers. If the controller fails during operation, it will be the phenomenon that the lights are not turned on and off in time, some lamp beads are dead, and the lights are flickering and illuminating.

The above content is provided by WOSEN. WOSEN is a professional manufacturer and supplier of Led Flood Light, Led Street Light, Led Solar Light, etc. For more information, please visit https://www.wosenled.com/ or contact admin@wosenled.com or WhatsApp +86-13425434349