Four installation methods of LED panel lights

The first one, the integrated ceiling installation method is often used in offices, it is relatively simple, and it is also a common installation method: first take a piece of ceiling, put the driver of the Luminous Ceiling Light on the ceiling next to it, connect the power cord, and then put on the panel Lights will do.

The second method is hoisting, which requires the use of hanging wires. First fix the 4 bases of the suspension wires on the roof, then screw the 4 suspension wires into the Luminous Led Ceiling Light, and pull the steel wire to adjust the height of the panel light. First fix the hanging wire installation piece on the ceiling, lock the screw (the hanging wire has been installed at the factory. The hanging wire is vertically down, and hang the components on the back of the LED panel light. It is convenient and trouble-free to install.

The third is embedded installation, also known as concealed installation. First draw the size of the inner edge of the LED panel light conversion frame with a pen, then cut it with a utility knife, then install the replacement frame and place the LED panel light driver, and then insert the lamp into the conversion frame.

The fourth method is surface installation on the ceiling, also known as ceiling installation. First fix the LED panel light conversion frame on the cement ceiling with screws, then connect the LED driver, and then press firmly to insert the panel light into the conversion frame.