How do I connect the two dimming wires (10V) from a 250W LED high Bay light?

June 20, 2023

If you've recently acquired a 250W Led High Bay Light with dimming capabilities, you may be wondering how to connect the two dimming wires (10V) properly. Understanding the process is crucial to ensure effective control over the light output and create the desired ambiance in your space. In this article, we will provide you with a step-by-step guide on how to connect the two dimming wires of your Led High Bay light, allowing you to achieve the perfect lighting environment.

Step 1: Safety First

Before you start any electrical work, it's essential to prioritize safety. Ensure that the power source is turned off and the circuit breaker is switched off to prevent any accidental shocks. Confirm that you have the necessary tools, such as wire strippers, electrical tape, and wire connectors, to perform the connection securely.

Step 2: Identify the Dimming Wires

In most cases, the two dimming wires are color-coded. They are often labeled as "DIM+" and "DIM-". However, if your high Bay Light doesn't have clear markings, consult the manufacturer's documentation or user manual to identify the dimming wires accurately. It's important to locate these wires correctly to ensure the dimming functionality works as intended.

Step 3: Strip the Wires

Using wire strippers, carefully strip a small section of insulation from the end of each dimming wire. This exposes the copper conductor beneath, allowing for proper connection.

Ufo High Bay Light 4 Jpg

Step 4: Prepare the Wires for Connection

After stripping the wires, twist the exposed copper strands gently to ensure they are tightly secured together. This step helps to prevent any loose connections, which could affect the dimming performance or lead to electrical issues.

Step 5: Connect the Dimming Wires

Now that the wires are prepared, you can connect them. There are a few different methods for connecting wires, depending on the type of connector you have available. Here are two common methods:

a. Wire Nuts: If you have wire nuts (also known as twist-on connectors), follow these steps:

Insert the twisted ends of the dimming wires into the wire nut.
Twist the wire nut clockwise until it is snug and secure.

Give the connected wires a gentle tug to ensure they are firmly held in place.

b. Crimp Connectors: If you prefer crimp connectors, follow these steps:

Insert the twisted ends of the dimming wires into the crimp connector.
Use crimping pliers to firmly squeeze the connector, creating a secure bond.

Give the connected wires a gentle tug to ensure they are properly crimped.

Step 6: Insulate the Connection

To ensure electrical safety and prevent any accidental short circuits, use electrical tape to wrap the exposed connection tightly. Start a few inches away from the connection and wrap the tape around several times, extending a few inches beyond the connection on both sides. This provides a protective barrier against any potential contact with other wires or surfaces.

Step 7: Testing and Verification

Once the connection is made and insulated, turn on the power and test the dimming functionality. Use the recommended dimming controller or switch to adjust the light output. If the dimming operation works as expected, congratulations! You have successfully connected the two dimming wires from your 250W LED high bay light.

Conclusion

Connecting the two dimming wires (10V) from your 250W LED high bay light is a straightforward process when following the correct steps. Always prioritize safety, identify the dimming wires accurately, prepare the wires properly, and use appropriate connectors for a secure connection. Remember to insulate the connection with electrical tape and test the dimming functionality to ensure everything is working correctly. By doing so, you can enjoy the full benefits of your high bay light's dimming capabilities, creating a well-lit space tailored to your needs.

The above content is provided by WOSEN. WOSEN is a professional manufacturer and supplier of Led high bay Light. For more information, please visit https://www.wosenled.com/ or contact admin@wosenled.com or WhatsApp +86-13425434349

Author:

Ms. Mandy

E-mail:

admin@wosenled.com

Phone/WhatsApp:

+8613425434349