How to Maintain Your Outdoor LED Flood Lights in Blizzard Weather

Choosing the Right Bulbs

• Energy efficiency: LED bulbs consume less electricity than incandescent, halogen, or fluorescent bulbs, which can save you money on your energy bills and reduce your carbon footprint.
• Long lifespan: LED bulbs can last up to 50,000 hours, which is much longer than other types of bulbs, which can last up to 2,000 hours. This means you don`t have to replace your bulbs as often, which can save you time and hassle.
• Low heat emission: LED bulbs produce very little heat, which means they are less likely to overheat or melt in blizzard weather, which can damage your fixtures or cause fire hazards.

• Brightness: The brightness of LED bulbs is measured in lumens, which is the amount of light they produce. The higher the lumens, the brighter the light. For outdoor LED flood lights, you want to choose bulbs that have at least 1,000 lumens, which can provide sufficient illumination for your property. However, you don`t want to choose bulbs that are too bright, as they can cause glare or light pollution, which can annoy your neighbors or harm wildlife.
• Color temperature: The color temperature of LED bulbs is measured in Kelvin, which is the hue of the light they produce. The lower the Kelvin, the warmer the light. The higher the Kelvin, the cooler the light. For outdoor LED flood lights, you want to choose bulbs that have a color temperature of around 5,000K, which is a cool white light that mimics natural daylight. This can enhance the visibility and clarity of your outdoor LED flood lights, especially in blizzard weather, which can create a dull and gloomy atmosphere.
• Beam angle: The beam angle of LED bulbs is the angle at which they spread the light they produce. The smaller the beam angle, the narrower the light. The larger the beam angle, the wider the light. For outdoor LED flood lights, you want to choose bulbs that have a beam angle of around 120 degrees, which can provide a wide and even coverage of your property, without wasting light or creating dark spots.

Adjusting the Angle and Position of the Lights

• To avoid direct exposure to snow or ice: Snow or ice can accumulate on your outdoor LED flood lights, which can reduce their brightness, damage their fixtures, or cause short circuits. You want to angle and position your outdoor LED flood lights so that they are not directly exposed to snow or ice, and they have enough clearance to prevent snow or ice buildup. You can also use a broom or a shovel to remove any snow or ice that may have accumulated on your outdoor LED flood lights.
• To aim the lights at the areas you want to illuminate: You want to angle and position your outdoor LED flood lights so that they aim at the areas you want to illuminate, such as your front door, driveway, backyard, or garage. This can provide sufficient light for your security and safety, and also create a pleasant and inviting atmosphere. You can also use a dimmer or a timer to adjust the brightness and duration of your outdoor LED flood lights, depending on your needs and preferences.
• To avoid glare or light pollution: Glare or light pollution is the unwanted or excessive light that can cause discomfort, annoyance, or harm to you, your neighbors, or wildlife. You want to angle and position your outdoor LED flood lights so that they do not cause glare or light pollution, and they only illuminate the areas you need. You can also use shields, hoods, or filters to reduce the glare or light pollution of your outdoor LED flood lights.

• For front door: You want to angle and position your outdoor Led Flood Light so that it illuminates your front door and the surrounding area, such as your porch, steps, or walkway. You can mount your outdoor LED Flood Light above or beside your front door, and angle it downwards and slightly outwards, to provide a clear and bright view of your entrance. You can also use a motion sensor or a smart control to activate your outdoor LED flood light when someone approaches your front door, and turn it off when no one is there.
• For driveway: You want to angle and position your outdoor LED flood light so that it illuminates your driveway and the adjacent area, such as your lawn, fence, or gate. You can mount your outdoor LED flood light on the wall or the roof of your house, and angle it downwards and slightly sideways, to provide a wide and even coverage of your driveway. You can also use a dusk-to-dawn sensor or a timer to activate your outdoor LED flood light when it gets dark, and turn it off when it gets light.
• For backyard: You want to angle and position your outdoor LED flood light so that it illuminates your backyard and the surrounding area, such as your patio, deck, or pool. You can mount your outdoor LED flood light on a pole or a tree, and angle it downwards and slightly inwards, to provide a focused and bright light for your backyard. You can also use a dimmer or a remote control to adjust the brightness and color of your outdoor LED flood light, depending on your mood and occasion.

Cleaning and Protecting the Fixtures

• Reduced brightness: Dirt, dust, or snow can accumulate on the lens of your outdoor LED flood lights, which can reduce the brightness and clarity of the light they produce. This can compromise your security and safety, and also affect the appearance and ambiance of your property.
• Corrosion: Moisture, salt, or chemicals can penetrate the housing or the wiring of your outdoor LED flood lights, which can cause corrosion or rust.
• Short circuit: Snow or ice can melt and drip into the wiring or the sockets of your outdoor LED flood lights, which can cause short circuit or electrical shock. This can damage the bulbs and the fixtures, and also pose a fire or safety hazard.

To clean and protect the outdoor LED flood lights, you need to follow some tips, such as:

• Removing snow and ice regularly: You want to remove any snow or ice that may have accumulated on your outdoor LED flood lights, especially after a snowstorm or a blizzard. You can use a broom or a shovel to gently brush off any snow or ice from your outdoor LED flood lights, and make sure they are dry and clear. You can also use a hair dryer or a heat gun to melt any stubborn snow or ice, but be careful not to overheat or damage your outdoor LED flood lights.
• Wiping the lenses with a soft cloth: You want to wipe the lenses of your outdoor LED flood lights with a soft cloth, preferably microfiber, to remove any dirt, dust, or moisture that may have accumulated on them. You can also use a mild detergent or a glass cleaner to clean the lenses, but make sure to rinse them with water and dry them thoroughly. You want to avoid using any abrasive or corrosive materials, such as alcohol, vinegar, or bleach, to clean the lenses, as they can scratch or damage them.
• Applying a protective coating or sealant: You want to apply a protective coating or sealant to the housing and the wiring of your outdoor LED flood lights, to prevent moisture, salt, or chemicals from penetrating them and causing corrosion or rust. You can use a spray or a brush to apply a thin layer of a waterproof or anti-corrosive coating or sealant, such as silicone, polyurethane, or epoxy, to the housing and the wiring of your outdoor LED flood lights, and let them dry completely. You want to avoid using any oil-based or flammable coating or sealant, as they can catch fire or damage your outdoor LED flood lights.

• For metal fixtures: Metal fixtures are prone to corrosion or rust, especially in blizzard weather, which can weaken or damage them. You want to clean and protect the metal fixtures of your outdoor LED flood lights by removing any rust or corrosion with a wire brush or a sandpaper, and applying a rust-proof or anti-corrosive coating or sealant, such as zinc, chrome, or paint, to the metal fixtures, and let them dry completely.
• For plastic fixtures: Plastic fixtures are resistant to corrosion or rust, but they can crack or break in blizzard weather, which can expose or damage them. You want to clean and protect the plastic fixtures of your outdoor LED flood lights by removing any dirt or dust with a soft cloth or a vacuum cleaner, and applying a UV-resistant or anti-cracking coating or sealant, such as acrylic, polycarbonate, or vinyl, to the plastic fixtures, and let them dry completely.
• For glass fixtures: Glass fixtures are durable and transparent, but they can shatter or fog in blizzard weather, which can reduce or distort the light they produce. You want to clean and protect the glass fixtures of your outdoor LED flood lights by removing any dirt or dust with a soft cloth or a glass cleaner, and applying a anti-fogging or anti-shattering coating or sealant, such as wax, resin, or film, to the glass fixtures, and let them dry completely.

Conclusion