How to use and maintain led explosion-proof flood lights?

LED explosion-proof floodlights are special lamps used in coal, petroleum, petrochemical, electric power, metallurgy, chemical plants, textile factories and other enterprises. Many factories choose to buy LED explosion-proof floodlights because they fail the inspection. Some common lighting fixtures may have been used before, which is not safe. If the factory produces flammable and explosive gas during production operations, we will use led explosion-proof floodlights for factory inspection. Many people repurchase led explosion-proof floodlights but do not know how to use and maintain them. Here's how to use led explosion-proof floodlights instead. And precautions when using led explosion-proof floodlights.

Led explosion-proof floodlights are generally sold in sets, you can use them after you buy them, and connect them online. The following describes the precautions when replacing the lamp. The power should be cut off before the lampshade of the explosion-proof lamp is opened. However, due to the complexity of the interlocking equipment, it is difficult to complete, and most lamps only have a warning sign with the words "forbidden to open with electricity" in the conspicuous part of the shell.

And since the surface temperature of the bulb is still high after the power is turned off, if the lampshade is opened immediately, there is still a danger of igniting an explosive gas mixture (mainly referring to the explosion-proof layout). Light sources and lamps that can quickly open the lid should be aware of this. When replacing the bulb (tube), the flameproof joint surface of the explosion-proof lamp should be properly maintained and not damaged; the flameproof surface after cleaning should be coated with phosphating paste or 204-1 anti-rust oil, and other paints are prohibited; the explosion-proof surface should not have any rust layer. If the rust is fine, there should be no pitting on the surface after cleaning. For added safety luminaires, it is very important to ensure that the seals used for dust and water protection must be intact.

If the sealing ring is seriously damaged, the sealing ring of the same specification and material should be replaced, and the whole lamp should be replaced if necessary. When repairing, pay attention to whether the lampshade is in good condition. If there is a broken wire, please replace it immediately.

The above content is provided by WOSEN. WOSEN is a professional manufacturer and supplier of Led Flood Light, Led Street Light, Led Solar Light, etc. For more information, please visit https://www.wosenled.com/ or contact admin@wosenled.com or WhatsApp +86-13425434349