Outdoor wall sconces can be mounted on a wall or on a pole. When installed on a brick wall, the wooden bricks should be cleaned when building the wall (it is forbidden to use wooden bricks) Wedges instead of wooden bricks) or metal components, when installing lamps, fix the lampstand on wooden bricks or metal components; when outdoor Wall Pack Lights are installed on pillars When installing, the metal components should be pre-embedded on the column or the metal components should be fixed on the column with hoops, and then the outdoor wall light should be directly installed on the metal components. The height of the lower edge of the outdoor Led Wall Pack Light from the ground is 1.8m. The height of the outdoor wall lamps on the four sides can be different, but the height of the outdoor wall lamps on the same wall must be the same. The structure of the outdoor wall lamp should adapt to the environment of the installation place. It is best to choose a sealed switch, because outdoors will often be exposed to rain and sun. If it is in a humid environment, a porcelain waterproof switch should be used.
The outdoor wall lamp should be connected with the wiring method to select the switch type. For open wiring, a pull switch should be used, which is economical and safe. Concealed wiring should be determined according to the wiring situation, such as concealed wiring in the wall can choose embedded concealed key switch. The operating mechanism of the outdoor wall light switch should be sensitive and light, and its action is completed by the instantaneous switching mechanism. Except for pull-wire switches and double-throw switches, the connection and disconnection of contacts shall be clearly marked. The pull wire of the outdoor wall lamp pull switch should be an insulating rope, the length of which should not be less than 1.5m. The outdoor wall light switch is generally installed by the door or other places that are easy to operate. Outdoor wall lamp is a necessary facility in public places, and it can play its biggest role at night. However, if the designer can design it properly, It can also play a role in beautifying the city during the day, but in social activities, there are often incidents of outdoor wall lamps falling and hurting people. Therefore, we have to take care of public facilities and at the same time make our lives more secure. First, choose a suitable wooden platform (board) or lamp base according to the shape of the lamp, and place the lamp on it. The margin left around should be symmetrical. The installation hole is also opened on the bottom plate, the lamp head line of the lamp is thrown out from the outlet hole of the wooden platform (board), and the connector is connected in the lamp holder box on the wall, and tightly wrapped, and the connector is inserted into the box. Align the wooden stand or plank with the lamp head box, and stick it to the wall. You can use machine screws to fix the wooden stand directly on the ear of the box. If it is a wooden plank, you should use an expansion tube to fix it. Adjust the wooden platform (board) or the bottom bracket of the light to make it straight and not skewed, and then use machine screws to screw the lamp on the wooden platform (board) or the bottom bracket of the lamp, and finally match the bulb, lamp or lampshade. For wall lamps installed outdoors, waterproof rubber pads should be added between the tabletop or lamp base and the wall, and drain holes should be laid. The glass covers of large lamps installed in important places should have measures to prevent them from being broken and splashed downwards (except for design requirements). Generally, protective nets woven with transparent nylon wires can be used, and the specifications of the meshes should be determined according to the actual situation.
