Requirements for solar street lights on light pole technical reference

January 06, 2023

Nowadays, there are fixed and high electricity bills in the work of ordinary lighting street lamps. It is necessary to maintain or replace the lines and other configurations continuously for a long time, and the maintenance costs increase year by year. However, solar street lamps are a one-time investment without any maintenance costs. The investment cost can be recovered in three years, and the long-term benefits can be achieved. However, solar street lights have relatively high requirements for light poles. Next, the staff of the Solar Street Light company will tell you what are the technical reference requirements for solar street light poles.

1. The main rod adopts one-time molding, and the welding seam of the steel rod (Q235) must be flat and smooth. The welding method of the light pole is automatic sub-arc welding, and the coloring flaw detection inspection meets the requirements of the welding international GB/T3323-1989111 standard. The light pole socketing method is fixed with nails and top wires.

2. The anti-corrosion treatment of the light pole is hot-dip galvanized, and the surface of the galvanized layer is smooth and beautiful, with consistent luster. There are no wrinkled skin, falling, zinc tumor, peeling, spots, and defects on the yin and yang surfaces. The thickness of the zinc layer should reach more than 85um. The adhesion of the galvanized layer should meet the GB2694-98 standard, ensuring that it will not fade for 8 years. The wind resistance of the light pole The capacity is designed according to 36.9 m/s. The anti-corrosion life of solar street light poles is more than 20 years.

3. The surface of the light pole is sprayed with thickness ≧ 100um, the adhesion reaches GB9286-880 level, the surface is smooth: hardness ≧ 2H, outdoor weather-resistant materials are used, and the sprayed material is all polyester plastic powder.

4. Light pole technology and acceptance standards are implemented according to national standards. The design factor is 1.8. The design life of the light pole is more than 20 years.

5. The design of the light pole should be convenient for wire threading, and the hand hole door should be in the form of a backpack door. The pole door must be flat and smooth, and the deviation from the level of the pole is not more than ±1mm. The interchangeability between the same light pole door and the door is better, and it can meet the anti-theft and rain-proof requirements. After the pole door is cut, the part is strengthened to basically reach the strength of the original whole pole.

6. Appearance color: according to the color specified by the owner.
The above are the requirements for light poles. Although solar street lights seem to be very simple, there are still many requirements for their installation. We have to operate step by step according to their requirements.

We firmly believe that superior quality is an essential element to earn the trust of our customers. The LED flood lights, Led High Bay Lights, Led Panel Lights, LED Solar Lights, and LED street lights we produce all undergo strict quality inspections to ensure that every product we leave the factory meets the quality standards. For more information, please contact us:
Tel :+86-13425434349
Mobile Phone :+8613425434349
Email :admin@wosenled.com

Author:

Ms. Mandy

E-mail:

admin@wosenled.com

Phone/WhatsApp:

+8613425434349