Specifications for Inspection and Construction Acceptance of Solar Street Lights

December 15, 2022

1. Before installing and adjusting led solar street lights, please check whether the models and sizes of Solar Street Light poles, lighting fixtures, solar photovoltaic panel components, control panels, and batteries meet the design requirements.

2. Whether the position of the light pole is effective and whether it is vertical to the ground.

3. Whether the orientation angle and inclination angle of solar photovoltaic panel components meet the design requirements (solar photovoltaic panel is 5° southward), and whether there are obvious obstacles.

4. Whether the installation of the solar street light control panel meets the design requirements.

5. The surface of the hot-dip galvanized and paint layer of the solar street light pole and the cantilever should be smooth and undamaged.

6. The basic specifications, design elevation, and strength level of concrete meet the design requirements.

7. The solar street light arm should be installed perpendicular to the center line of the road and fixed firmly. When the light pole is installed, the relative height of the light pole arm should meet the design requirements, and the tightness of the lower wire should be consistent.

8. The horizontal axis of the solar street light should be consistent with the axis of the cantilever arm, and the horizontal axis should be parallel to the road surface, and the projection angle of the projection lamp should be adjusted appropriately. The uniform chromaticity and average light intensity of the LED lights meet the design requirements.

Ip65 Led Solar Street Light 11

9. Metal light poles, solar panel control module structures, support frames, etc. should be protected and grounded, and the wire connectors should be fixed and firm.

10. Whether the diagonal specifications of the flange can meet the requirements of the design engineering drawings.

11. Light poles should meet the internal stress requirements of wind internal stress calculation and national industry standards.

12. Whether the anti-theft system and lightning protection measures of street lamps are perfect. Specifications for inspection and construction acceptance of solar street lamps.

The above content is provided by WOSEN. WOSEN is a professional manufacturer and supplier of Led Flood Light, Led Street Light, Led Solar Light, etc. For more information, please visit https://www.wosenled.com/ or contact admin@wosenled.com or WhatsApp +86-13425434349

Author:

Ms. Mandy

E-mail:

admin@wosenled.com

Phone/WhatsApp:

+8613425434349