Aluminum Alloy Wall Lamp Installation Method And Precautions
March 02, 2023
Lamps play many roles in our life, and there are many styles of them. Today, we will directly talk about the installation of aluminum alloy wall lamps. I don`t know if anyone has paid attention to the installation of aluminum alloy wall lamps. Most users will definitely say that they have never paid attention to the installation of aluminum alloy wall lamps. . It will scare me if someone suddenly says he understands, unless you are a master installer of aluminum alloy wall lamps or are curious about it, you will understand the installation of aluminum alloy wall lamps so well. Luban Daojia lighting installation master explained and introduced. 1. Precautions for installation of aluminum alloy wall lamp 1. If you want to install a wall lamp on the bathroom wall, please install the lamp on the wall perpendicular to the window, so that the shadow will not be reflected on the window. 2. During the operation, do not hit the position of the wires. Before drilling, you need to know the circuit distribution in the room in advance. If the drilling is broken, you will need extra effort and cost. 3. Wall lamps are generally placed on the open walls of low furniture such as beds, tables, sofas, and coffee tables, or installed on the corners of the walls, not on the wall in the middle of the headboard. 4. There is also a lot of emphasis on the installation process. The colors must be well matched. The color of the wall lamp installation and the effect of the wire treatment must be in harmony with the overall environment, otherwise it will affect the appearance and fail to achieve the expected decorative effect. 2. Installation method of aluminum alloy wall lamp 1. Installation of aluminum alloy wall lamp - adhesive bonding (1) The installation of wall lamps sometimes requires adhesives. If low-viscosity adhesives are used, ordinary paint spray guns can be used for spraying; spray gun. (2) When spraying, the glue should be applied evenly, and the hand should be evenly held. Do not let random solvents be lost in the air, which will pollute the indoor air or the environment. (3) For high-viscosity limb-like and paste-like adhesives, and for adhesive parts such as flooring, etc., glue boards can be used for glue coating, and 1-1.5 mm thick elastic steel plates and hard PVC boards can be used for rubber boards. and other materials. 2. Installation of aluminum alloy wall lamp - determine the height position (1) When the distance from the height of the wall lamp to the ground is 80-85 cm, its horizontal plane is about 1440-1850 mm, which means that the height from the ground is 2240-2650 mm. (2) The wall lamp in the bedroom is a little closer to the ground, generally around 1400-1700 mm, and the distance from the wall lamp to the wall is about 95-400 mm.
3. Installation of aluminum alloy wall lamp - drilling (1) Before installation, you must plan the installation location in advance, then use a soft ruler to measure accurate data, make marks on the corresponding wall, and then use an electric drill to drill holes. You need to pay attention to its depth and the distance between the holes. (2) To determine the position of the hole, it must be determined according to the chassis. Most wall lamps generally have two screw holes, and the distance between the screws is about 10 cm. If it is not matched, it is not only ugly, but also unreasonable to install. The above content is provided by WOSEN. WOSEN is a professional manufacturer and supplier of Led Flood Light, Led Street Light, Led Solar Light, etc. For more information, please visit https://www.wosenled.com/ or contact admin@wosenled.com or WhatsApp +86-13425434349