Living Room Ceiling Panel Light Installation Tutorial

March 02, 2023

After our home is renovated, we usually install some lamps under the ceiling of each room. Like traditional home decoration, if the ceiling is not suspended, the ceiling lamps are basically installed under the ceiling. Of course, there are more and more suspended ceilings now, and all the ceilings are installed with downlights or other grille lights. But home improvement is still dominated by ceiling lamps. So many friends want to install the ceiling lamp by themselves.

If we want to install the ceiling lamp by ourselves, we should first distinguish the components of the ceiling lamp. Because after we divide these parts clearly, we can know which ones to connect in each step. As for the ceiling lamps used in the family, they can be divided into the following three parts. Everyone can find out.

①: The bottom box of the ceiling lamp, which is the part of the power supply we reserved. This part is generally in the top plate, the bottom box of the lamp installed in the dark. After the circuit transformation in our home is completed, we need to pass the wires to this position. There are usually two wires in the common bottom box to meet the installation of our ceiling lamps. This is the most basic condition for the installation of ceiling lamps, that is, the power supply.

②: The base of the ceiling lamp. That is to say, after we buy a ceiling lamp, we can take it apart. One of the most important parts is the base of the ceiling lamp. The base of the ceiling lamp is generally made of metal or other materials, and the other part is the light source of the lamp inside. . We can almost disassemble this part as a whole. And we will find that the bottom plate of the ceiling lamp has reserved screw holes, which are used for installation with our ceiling or bottom box.

③: The other part of the ceiling lamp is the lampshade of the ceiling lamp. Because no matter what kind of bulbs are used in the ceiling lamp, such as energy-saving bulbs or LED lamp beads, they are all installed on the bottom plate. In the later stage, we need to use the lampshade to cover all these bulbs inside, so as to reflect a good effect. So for the lampshade of the ceiling lamp, it can be disassembled.

How to install ceiling lights?

In the above, I briefly introduced the specific components of the ceiling lamp. The purpose of introducing the components of the ceiling lamp is to let us understand the composition of each part of the ceiling lamp, so that it is convenient for us to install. So, if we plan to install the ceiling lamp by ourselves, then I personally recommend the following installation methods for everyone.

①: Preparation. The so-called preparatory work is the work we do before we prepare the ceiling lamp. Before installing the ceiling lamp, the bottom box of the lamp should be processed. Here we must first cut off the power, and then distinguish the two wires of the bottom box light, one of which is the control wire of the switch, which is also the live wire, and the other is the neutral wire. Clean the joints of the wires to expose the copper core. Then clean the screw holes of the bottom box. Then you are ready to install the ceiling light

②: The split of the ceiling lamp. If we plan to install ceiling lights, we need to disassemble the ceiling lights. Because the lampshade of the ceiling lamp can be removed as mentioned above. At this time, we will remove the lampshade of the ceiling lamp from the ceiling lamp. At this time, we need to observe the disassembly method of the lampshade of the ceiling lamp. Because after we fix the lamp holder, we also need to install the lampshade of the ceiling lamp. After that, handle the wiring part of the ceiling lamp in place.

③: Installation of the base of the ceiling lamp. At this time, we can install the base of the ceiling lamp. The most common way we install the base of the ceiling lamp is to use the screw holes on the base of the ceiling lamp and the socket bottom box reserved on the top plate, that is, the screw holes of the eight-six box for installation. We first find the exact position, use a screw to fix the base, and then adjust the position of the other screw hole to find the screw hole in the eight-six box. If our 86 points are damaged or there is no screw hole, or the size is wrong, another method can be adopted. It is to directly fix the base of the ceiling lamp on the top plate.

④: The wiring of the ceiling lamp. After we fix the bottom box, we can start wiring. Everyone must pay attention, the wiring must be completely disconnected from the power supply before wiring, live operation is not allowed. At this time, we are just connecting the two wires in the bottom box with the power connection point that comes with the ceiling lamp. At this time, it is necessary to distinguish between live wire and neutral wire. Connect the live wire to the position where the light is connected to the live wire, and connect the neutral wire to the corresponding position of the neutral wire.

⑤: Debug and install the lampshade. After we have installed the power cord of the ceiling lamp, we need to conduct power-on debugging. In order to detect whether our ceiling lamp can be lit normally. Generally, we just turn on the switch after closing, so that the ceiling light can be turned on normally, which means that our wiring is correct. If the ceiling light is not on, it means that our light may be broken, or there is a problem with the circuit. When the light is on normally, we can install the lampshade. The way to install the lampshade is the opposite way when we disassemble it. Like the conventional method, we put the lampshade on, find the lock, and then click on the lock.

conclusion

Regarding the installation of ceiling lights, we must first distinguish the type of ceiling lights in our home. Then take the corresponding installation method according to the type of our ceiling lamp. The most common difference here is that the way of fixing the ceiling lamp and the roof is different, so we must first determine the fixing method of the bottom plate and the roof of the ceiling lamp, and then complete the wiring of the ceiling lamp and the installation of the lampshade. Finally, I would like to remind everyone that if we are not electricians, we should try our best not to operate it. If we connect the light wire, we must cut off the power supply before wiring.

The above content is provided by WOSEN. WOSEN is a professional manufacturer and supplier of Led Flood Light, Led Street Light, Led Solar Light, etc. For more information, please visit https://www.wosenled.com/ or contact admin@wosenled.com or WhatsApp +86-13425434349

Author:

Ms. Mandy

E-mail:

admin@wosenled.com

Phone/WhatsApp:

+8613425434349